Product Information Section Piping Sanitary Stainless Steel 304 Pneumatic Angle Seat Piston Valve | 1" , 1.2" l DN25 DN32
Stainless steel 304 for resistance to corrosion and high temperatures. Attaches to a fitting to help provide a leak-resistant seal on a tube or hose. Ferrule fitting for providing a seal when compressed between two mating components. Made with high quality 304 Stainless Steel, durable.
The maximum operating temperature is 760° C. Due to Stress and Intergranular Corrosion, its continuous service temperature is limited to 420° C.
The Pneumatic Angle Seat Valve is equipped with a pneumatic actuator, which is controlled by a two-position three-way solenoid valve in the case of single action.
The pressure of the guiding medium enters the actuator and acts on the piston to make the valve core shuttle in the valve cavity to open or close the valve.
The return of the spool is usually done with the help of the spring back in the pneumatic actuator. -In a valve in a double-acting configuration, there is no rebound spring, and the pilot medium is used to both open and close the valve.
Connection type: Clamp-Clamp
Size:
1“ (DN25) – Weight 1.8kg Clamp to Clamp Length 143mm
1.2“ (DN32) – Weight 2.04kg Clamp to Clamp Length 151mm
Packaging Contents: 1x Angle Seat Piston Valve
Contact us for more info! Sam Wong - 019-479 5057
The maximum operating temperature is 760° C. Due to Stress and Intergranular Corrosion, its continuous service temperature is limited to 420° C.
The Pneumatic Angle Seat Valve is equipped with a pneumatic actuator, which is controlled by a two-position three-way solenoid valve in the case of single action.
The pressure of the guiding medium enters the actuator and acts on the piston to make the valve core shuttle in the valve cavity to open or close the valve.
The return of the spool is usually done with the help of the spring back in the pneumatic actuator. -In a valve in a double-acting configuration, there is no rebound spring, and the pilot medium is used to both open and close the valve.
Connection type: Clamp-Clamp
Size:
1“ (DN25) – Weight 1.8kg Clamp to Clamp Length 143mm
1.2“ (DN32) – Weight 2.04kg Clamp to Clamp Length 151mm
Packaging Contents: 1x Angle Seat Piston Valve
Contact us for more info! Sam Wong - 019-479 5057
